TM 9-2320-289-20
3-28.
EXHAUST MANIFOLD REPLACEMENT (Con’t).
3.
Position
bottom
holes in
4.
Install 5
exhaust
cylinder
NOTE
Perform step 3 only if working on left side of M1010.
bracket (17), alining 2
holes in bracket with bolt
engine cylinder block.
bolts (13) securing left side
manifold (6) to engine
block. Tighten bolts, 2 studs
(12), and stud (14) to 25 Ib.-ft.
(34 N•m).
NOTE
Perform step 5 only if working on
left side of M1010.
5.
Install air conditioner compressor
(18) to bracket (17) with bolt (19).
6.
Install oil cooler hose bracket (11) to left side exhaust manifold (6) with insulator (10), new
Iockwasher (8), bolt (9), and 3 nuts (7).
Perform step 7
7.
Install right side exhaust
NOTE
only if working on right side exhaust manifold (16).
manifold (16) with 8 bolts (13). Tighten bolts to 25 Ib.-ft. (34 N•m).
8.
Install new exhaust pipe seal (1) and secure exhaust pipe (2) to right or left side exhaust
manifold (6 or 16) with 3 studs (15), springs (3), 3 new Iockwashers (4), and nuts (5). Tighten
nuts to 15 Ib.-ft. (20 N•m).
9.
Connect glow plug leads as tagged.
FOLLOW-ON TASKS:
Install alternators and alternator brackets if removed (M1010). (See paragraph 4-3)
Install rear battery if removed (M1010). (See paragraph 4-39)
Connect both battery negative cables. (See paragraph 4-38)
TA49828
3-85/(3-86 blank)
