TM 9-2320-289-20
3-28.
EXHAUST MANIFOLD REPLACEMENT (Con’t).
9.
Remove left side exhaust manifold (6). Remove 3 studs (15) as required.
b. INSTALLATION
NOTE
If installing left side exhaust manifold (6), perform steps 1-6, 8, and 9.
If installing right side exhaust manifold (16), perform steps 7-9.
1.
Position left side exhaust manifold (6) over bolt holes in engine cylinder block and install 2
studs (12) and stud (14). DO NOT fully tighten studs.
2.
Install nut and washer securing oil level indicator tube mounting bracket to stud (14).
TA49827
3-84
