FOLLOW-ON TASKS - TM-9-2320-289-20

3-15. FUEL TANK FILLER DOOR, FILL PIPE ASSEMBLY, AND FILL/VENT HOSES REPLACEMENT (ALL EXCEPT M1009 AND M1010)

3-16. FUEL TANK FILLER DOOR, CAP, AND FILL PIPE ASSEMBLY REPLACEMENT (M1009)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
161

TM 9-2320-289-20 3-15. FUEL TANK FILLER DOOR, FILL PIPE ASSEMBLY, AND FILL/VENT HOSES REPLACEMENT (ALL EXCEPT M1009 AND M1010) (Con’t). 2. Install door assembly (3) with 2 bolts (2) . 3. Assemble fill pipe assembly (7), housing (6), fill hose (9), and vent hose (12), as required, with 3 screws (5) and 2 clamps (8 and 13). DO NOT fully tighten clamps. 4. Install assembled unit to body panel with 3 screws (4). 5. Install vent hose (12) and fill hose (9) at fuel tank with clamps (11 and 10). Tighten clamps (8, 10, 11, and 13). FOLLOW-ON TASKS: Refill fuel tank. Connect both battery negative cables. (See paragraph 4-38) Bleed air from fuel system if required. (See paragraph 3-17) Check for leaks. TA49805 3-49

Privacy Statement
Press Release
Contact