3-9. AIR CLEANER AND SEAL REPLACEMENT

3-9. AIR CLEANER AND SEAL REPLACEMENT (Cont)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
126

TM 9-2320-289-20 3-9. AIR CLEANER AND SEAL REPLACEMENT. This task covers: a. Removal b. Installation CAUTION When servicing air cleaner assembly (6), place a screen or a clean rag over air intake opening to guard against objects falling follow this caution may result in equipment damage. 1. Remove 2 nuts (2), 2 washers (1), and lid (3) of air cleaner assembly (6) . 2. Remove filter element (4), polywrap band (5), and air cleaner assembly (6) . 3. Remove air cleaner seal (7) and discard if damaged. 4. Clean polywrap band (5) if required. (See TM 9-2320-289-10) b. INSTALLATION NOTE Remove screen or intake opening. rag from air 1. If removed, install air cleaner seal (7) over intake manifold inlet (9). 2. Install air cleaner assembly (6) on air cleaner seal (7). 3. Install filter element (4) and polywrap band (5) inside air cleaner assembly (6) . 4. Install lid (3) of air cleaner assembly (6) with studs (8) on intake manifold inside. Failure to (9) fitted through holes in lid. TA49778 3-14

Privacy Statement
Press Release
Contact