3-2. CRANKSHAFT PULLEY ASSEMBLY REPLACEMENT

CHAPTER 3 ENGINE SYSTEMS MAINTENANCE

3-3. ENGINE OIL LEVEL INDICATOR TUBE SEAL REPLACEMENT

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
108

TM 9-2320-289-20 3-2. CRANKSHAFT PULLEY ASSEMBLY REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition Alternator belts removed. (See paragraph 4-2 or 4-3) Power steering belt removed. (See paragraph 8-15) Air conditioner belt removed (M1010) See paragraph 3-35) 1. Remove 4 bolts (1) and crankshaft pulley assembly (2) from torsional damper assembly (3). 1. Position crankshaft pulley assembly (2) against torsional damper assembly (3). 2. Install 4 bolts (1) and tighten. FOLLOW-ON TASKS: Install air conditioner belt (M1010). (See paragraph 3-35) Install power steering belt. (See paragraph 8-15) Install alternator belts. (See paragraph 4-2 or 4-3) TA49770 3-2

Privacy Statement
Press Release
Contact