TM 9-2320-289-20
Table 2-4. Electrical Troubleshooting (Con’t)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
46. WASHER INOPERATIVE; WIPER OPERATIVE
Step 1.
Check washer fluid reservoir for proper level.
Step 2.
Check washer nozzles and hoses for restrictions or damage.
Clear restrictions or replace if damaged. (See paragraph 10-11)
Step 3.
Turn key to “RUN” position. Have assistant hold control lever in “WASHER” position.
Check for voltage to windshield washer solenoid.
If there is voltage, replace windshield wiper motor. (See paragraph 10-11)
If there is no voltage, trace circuit. (See wiring diagram F-20 or F-21)
2-12.
STE/lCE TROUBLESHOOTING
Simplified Test Equipment for Internal Combustion Engines (STE/lCE) for use with the CUCV
Series trucks is in the process of being developed. When development is complete, STE/lCE
troubleshooting procedures will be added to this manual.
Change 2
2-77/(2-78 blank)
