3-4. ENGINE OIL AND OIL FILTER REPLACEMENT

3-3. ENGINE OIL LEVEL INDICATOR TUBE SEAL REPLACEMENT

3-5. CRANKCASE DEPRESSION REGULATOR VALVE (CDRV) ASSEMBLY AND HOSES REPLACEMENT

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
110

TM 9-2320-289-20 3-4. ENGINE OIL AND OIL FILTER REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Materials/Parts Tools/Test Equipment Engine oil filter Torque wrench Manual References LO 9-2320-289-12 a. REMOVAL 1. Remove drainplug (3) and drain engine oil into a suitable container. 2. Remove engine oil filter (2) from engine oil filter connector (1). Discard engine oil filter. b. INSTALLATION 1. Apply small amount of engine oil to sealing surface of new engine oil filter (2) . 2. Install new engine oil filter (2) to engine oil filter connector (1). 3. Tighten engine oil filter (2) one full turn after sealing surface contacts engine block. DO NOT overtighten. 4. Install drainplug (3) and tighten to 20 Ib.-ft. (27 N•m). 5. Refill engine oil. (See LO 9-2320- 289-12) FOLLOW-ON TASKS: Run engine and check for leaks. TA49772 3-4

Privacy Statement
Press Release
Contact