TM 9-2320-280-34
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd)
INSTRUCTIONS:
NOTE
All dimensions are in inches.
Remove all burrs and sharp edges after each fabrication.
1. Using NSN 9510-01-043-3616 metal bar, fabricate plate as shown in " "
D.
2. Using NSN 9510-01-813-5343 metal bar, fabricate spacer tube as shown in "E"
.
3. To fabricate back plate, position spacer tube (3) on plate (4) and weld into place as shown in " "
F
C-11
