TM 9-2320-280-34
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd)
INSTRUCTIONS:
NOTE
All dimensions are in inches.
Remove all burrs and sharp edges after each fabrication.
1. Using NSN 9510-01-043-3616 metal bar, fabricate plate as shown in " ".
A
2. Using NSN 9510-01-043-3616 metal bar, fabricate spacer plate as shown in " ".
B
3. To fabricate front plate, position spacer plate (1) on plate (2) and weld into place as shown in " ".
C
C-10
