TM 9-2320-280-34
22-10.
AMBULANCE EXTERIOR BODY REPAIR (Cont'd)
e.
Left Rear Corner Roof Panel Repair
1.
Remove door weatherstrip. (TM 9-2320-280-20.)
2.
Scribe two lines (10) and (5) centered over fifteen rivets (3) and (7) on rear corner roof panel (4) and body panels
(1).
3.
Using a 0.125-in. (3.175 mm) drill, remove three rivets (7) from rear corner roof panel (4) and body panels (1).
4.
Using a 0.187-in. (4.75 mm) drill, remove twelve rivets (3) from rear corner roof panel (4) and body panels (1).
Remove rear corner roof panel (4).
5.
Remove adhesive residue and clean body panels (1). Do not remove scribed lines (10) and (5) marked in step 2.
6.
Position rear corner roof panel (4) on body panels (1) and transfer scribed lines (10) and (5) marked in step 2.
Remove rear corner roof panel (4).
7.
Using scribed lines (5) marked in step 6, drill three 0.125-in. (3.175 mm) diameter holes ( ) in rear corner roof
6
panel (4).
8.
Using scribed lines (10) marked in step 6, drill twelve 0.187-in. (4.75 mm) diameter holes (9) in rear corner roof
panel (4).
9.
Apply approximately 0.125-in. (3.175 mm) thickness of adhesive sealant to rear corner roof panel (4) and body
panels (1).
10.
Install rear comer roof panel (4) on body panel (1) with fifteen rivets (8) and (2).
11.
Spot paint rear corner roof panel (4) and body panels (1) (TM 43-0139.)
12.
Apply wicking sealant to fifteen rivets (8) and (2).
22-26
