TM 9-2320-280-34
22-10.
AMBULANCE EXTERIOR BODY REPAIR (Cont' )
d
b.Left Side Outer Roof Panel Repair
1.
Remove left nose cap (7) (para. a.).
2.
Scribe two lines (4) centered over forty-seven
3.
Using a 0.187-in. (4.75 mm) drill, remove forty-seven rivets (5) from outer roof panel (2) and body panel (1).
4.
Remove side outer roof panel (2).
5.
Remove adhesive residue and clean body panels (1). Do not remove scribed lines (4).
6.
Position side outer roof panel (2) on body panel (1)and transfer previously marked scribed lines (4) to panel (2).
Remove side outer roof panel (2).
7.
Using scribed lines (4) marked in step 6, drill forty-seven 0.187-in. (4.75mm) diameter holes (3) on left outer roof
panel (2).
8.
Apply approximately 0.125-in. (3.175 mm) thickness of adhesive sealant to side outer roof panel (2) and body
panels (1).
9.
Install side outer roof panel (2) on body panel (1) with forty-seven rivets (6)
10.
Position left nose cap (7) on body panel (1) and side outer roof panel (2).
11.
Using nose cap (7) as a template, drill three 0.187-in. (4.75) diameter holes (8) through left side outer roof panel
(2). Remove nose cap (7).
12.
Install nose cap (7) (para. a.).
13.
Spot paint side outer roof panel (2) and body panels (1) (TM 43-0139.)
14.
Apply wicking sealant to forty-seven rivets (6).
22-20
