TM 9-2320-280-34P
22-10. AMBULANCE EXTERIOR BODY REPAIR (Cont' )
d
2.
Using a 0.187-in. (4.75 mm) drill, remove seventeen rivets (1) from nose cap (2) and body panels (3).
3.
Remove nose cap (2) from body panel (3).
4.
Remove adhesive residue and clean body panels (3). Do not remove marked scribed lines (5).
5.
Position nose cap (2) on body panels (3 and transfer previously marked scribed lines (5) to nose cap (2).
6.
Using scribed lines (5) marked in step 5, drill seventeen 0.187-in. (4.75 mm) diameter holes (6) on nose cap (2).
7.
Apply approximately 0.125-in. (3.175 mm) thickness of adhesive sealant to nose cap (2) and body panels (3).
8.
Install nose cap (2) on body panels (3) with seventeen rivets (4).
9.
Spot paint nose cap (2) and body panels (3) as necessary (TM 43-0139).
10.
Apply wicking sealant to seventeen rivets (4).
22-19
