TM 9-2320-280-34
22-9.5. RIGHT R EAR FLOOR PANEL REPAIR (Cont'd )
12.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded area of metal strip F (1).
13.
Apply adhesive sealant to shaded area on right rear floor panel (2) and insert panel (3).
14.
Position metal strip F (1) on right rear floor panel (2) and insert panel (3), and install metal strip F (1)
on insert panel (3) with three rivets (6).
15.
Using metal strip F (1) as a template, locate, mark, and drill eleven 0.187-in. diameter holes
through right rear floor panel (2) and insert panel (3).
16.
Secure metal strip F (1) to right rear floor panel (2) and insert panel (3) with four rivets (4).
17.
Secure metal strip F (1) on insert panel (3) and right rear floor panel (2) with seven rivets (5).
18.
Spot-paint insert panel (3) and right rear floor panel (2). (Refer to TM 43-0139.)
22-16.92
Change 1
