TM 9-2320-280-34
This task covers:
a. Left Front Insert Panel Fabrication
f. Metal Strip D and Insert Panel Assembly
b. Metal Strips Fabrication
g. Metal Strip B and Insert Panel Assembly
c. Left Front Floor Panel Removal
h. Left Front Floor Panel and Insert Panel Drilling
d. Metal Strip A and Insert Panel Assembly
i. Insert Panel and Left Front Floor Panel Installation
e. Metal Strip C and Insert Panel Assembly
INITIAL SETUP:
Tools
Equipment Condition
General mechanic's tool kit:
Fire extinguisher mount bracket removed
automotive (Appendix G, Item 1)
(TM 9-2320-280-20).
Driver's seat assembly removed
Manual References
(TM 9-2320-280-20).
TM 9-2320-280-20
Front and rear seat support panels removed
TM 9-2320-280-24P
(TM 9-2320-280-20).
TM 43-0139
Left floor insulation removed
(TM 9-2320-280-20).
Materials/Parts
Maintenance Level
One hundred five blind rivets
(Appendix E, Item 194)
General Support
Twenty-five solid rivets (Appendix E, Item 198)
Sheet metal (Appendix E, Item 245)
Adhesive (Appendix B, Item 1.1)
Adhesive sealant (Appendix B, Item 4.1)
a. Left Front Insert Panel Fabrication
NOTE
All dimensions are in inches.
1.
Cut insert panel (1) from sheet metal as shown and mark four reference lines (2) and directional
arrow (3) on insert panel (1).
22-16.3
