TM 9-2320-280-34
19-3. DIFFERENTIAL REPAIR (Cont'd)
13.
Rotate housing (3) 90 degrees. Install cover (2) and two capscrews (1) on housing (3).
14.
Remove locknut (7) securing pinion yoke (6) and dirt deflector (5.1) to pinion gear (9). Discard
locknut (7).
15.
Remove pinion yoke (6) and dirt deflector (5.1) from pinion gear (9).
16.
Drive pinion gear (9) out of front pinion bearing (4).
17.
Remove two capscrews (1), cover (2), pinion gear (9), and spacer sleeve (8) from housing (3). Discard
spacer sleeve (8).
18.
Remove seal (5) and front pinion bearing (4) from housing (3). Discard seal (5).
7
6
5.1
5
4
3
2
8
1
9
19-6
Change 2
