TM 9-2320-280-34
19-3. DIFFERENTIAL REPAIR (Cont'd)
3.
Remove locknut (3), two O-rings (7), output flange (6), and seal (5) from output shaft (4). Discard
O-rings (7), seal (5), and locknut (3).
4.
Repeat steps 1 through 3 for opposite side.
5
4
7
6
3
5.
Install axle holding fixture adapters on housing (1) with four capscrews (10). Place housing (1) in
holding stand.
6.
Position housing (1) so differential cover (8) faces up. Remove twelve capscrews (9) and cover (8)
from housing (1).
9
8
AXLE HOLDING
FIXTURE ADAPTER
AXLE HOLDING
FIXTURE ADAPTER
1
10
Change 2
19-3
