TM 9-2320-280-34
18-4. TRANSFER CASE REPAIR (Model 242) (Cont'd)
11.
Position range shift fork (1) in range clutch sleeve (2).
12.
Holding range shift fork (1) and range clutch sleeve (2) together, install range clutch sleeve (2) in
input gear shaft (3) and pin (5) in angle slot (7) of shift sector (6). Move shift sector (6) as necessary
to align fork (1).
13.
Place thrust washer (8), fifty-three needle bearings (15), and thrustwasher (8) on mainshaft (14). Ij
Use petrolatum to hold needle bearings (15) in place on mainshaft journal (14).
14.
Carefully slide differential assembly (13) over mainshaft (14) and needle bearings (15) with
snapring (12). Make sure that, no needle bearings (15) are displaced.
15.
Place intermediate clutch shaft (11) over mainshaft (14).
16.
Position keyed thrust washer (10) over mainshaft (14) on intermediate clutch shaft (11) with
snapring (9). Snapring (9) seats in groove in mainshaft (14).
18-46
