TM 9-2320-280-34
17-30. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (4L80-E) (Cont'd)
o. Oil Pan and Filter Assembly
1.
Install hydraulic parts kit (5) on transmission case (6).
2.
Install magnet (4) in oil pan (1).
NOTE
Do not use a sealer or adhesive on oil pan seal, oil pan, or
transmission case surface.
3.
Install gasket (3) and oil pan (1) on transmission case (6) with seventeen capscrews (2). Tighten
capscrews (2) to 18 lb-ft (24 Nm).
p. Speed Sensors
Install two packing retainers (7), speed sensors (8), and bracket (9) on transmission case (6) with
capscrews (10).
Change 2
