TM 9-2320-280-34
17-13. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (3L80) (Cont'd)
o. Governor
1.
Install governor (23) into case (13).
2.
Install gasket (20) and governor cover (21) on case (13) with four capscrews (22). Tighten
capscrews (22) to 16-20 lb-ft (22-27 Nm).
p. Oil Filter
1.
Install seal (24) on end of intake pipe (25) marked "case". Assemble end of intake pipe (25) marked
"filter" into fluid parts kit (18).
2.
Install fluid parts kit (18) and intake pipe (25) into case (13).
3.
Install filter spacer (19) between control valve (6) and fluid parts kit (18) with shoulder bolt (26).
Tighten shoulder bolt (26) to 11 lb-ft (15 Nm).
q. Oil Pan
1.
Clean oil pan (16) in accordance with para. 2-13.
2.
Install gasket (17) and oil pan (16) on case (13) with thirteen capscrews (15). Tighten
capscrews (15) to 11-13 lb-ft (15-18 Nm).
Change 2
17-61
