TM 9-2320-280-34
17-9. CENTER SUPPORT REPAIR (3L80) (Cont'd)
WARNING
Air pressure must not exceed 15 psi (103 kPa) when air checking
clutch piston, or injury to personnel or damage to equipment may
result.
NOTE
Clutch piston must move up and down freely when air pressure is
applied.
6.
Apply compressed air through center support bolt hole (9) to check operation of clutch piston (6).
7.
Install four packing retainers (7) on oil delivery sleeve (8). Ensure lap joints on packing
retainers (7) are properly joined.
7
9
9
9
Change 2
17-35
