TM 9-2320-280-34
17-10. GEAR UNIT REPAIR (3L80) (Cont'd)
9.
Inspect sun gear shaft bushings (16) for damage. If damaged, perform steps 10 and 11, if not, go to
step 12.
10.
Using bushing remover J21465-15, slide hammer adapter and slide hammer, remove bushing (16)
from sun gear shaft (17). Discard bushing (16).
11.
Using driver handle and bushing installer J21465-5, install bushing (16) in sun gear shaft (17).
12.
Inspect output shaft bushing (18) for damage. If damaged, perform steps 13 and 14, if not, go to
step 15.
13.
Using bushing remover J21465-16, slide hammer adapter and slide hammer, remove bushing (18)
from output shaft (19). Discard bushing (18).
14.
Using driver handle and bushing installer J21465-1, install bushing (18)in output shaft (19).
15.
Refer to para. 2-14 for general inspection instructions for all other gear unit parts.
17-39
