TM 9-2320-280-34
This task covers:
Repair
INITIAL SETUP:
Appl_cab_e _____ ls
____ i___l _ Mode
Man_____efere___ s
____ual R____ nce
All except M966, M996A1, M997, M997A1,
TM 9-2320-280-20
TM 9-2320-280-24P
M997A2, M998, M998A1, M1035, M1035A1,
TM 43-0139
M1035A2, M1037, M1038, M1038A1, M1042,
TC 9-237
M1097, M1097A1, M1097A2
E___i____n___on__ti_n
_ qu pme_t C __di _o
Materi__s/____s
______al _ Part
Cargo shell door dovetail spring removed
Sealing compound (Appendix B, Item 53)
(TM 9-2320-280-20).
Primer, weld-through (Appendix B, Item 40)
Maint_____ce ___ el
_____ enan __Lev
Direct support
Repair
1.
Remove sealing compound (1) from cargo shell seam (2).
2.
Remove paint from surface area to be welded. (Refer to TM 43-0139).
3.
Prime surface area to be welded with weld-through primer. (Refer to TM 43-0139).
NOTE
Clamping devices are recommended to hold cargo shell reinforcement to
cargo shell during positioning.
4.
Position cargo shell reinforcement (5), cargo shell (3), and corner cap (4).
5.
Weld cargo shell reinforcement (5), cargo shell (3), and corner cap (4). (Refer to TC 9-237).
6.
Apply sealing compound (1) to cargo shell seam (2).
7.
Spot paint welded area. (Refer to TM 43-0139).
Change 2
