TM 9-2320-280-34
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic's tool kit:
Engine right mount and insulator removed
automotive (Appendix G, Item 1)
Materials/Parts
Maintenance Level
Five locknuts (Appendix E, Item 65)
Direct support
Manual References
TM 9-2320-280-24P
a. Removal
NOTE
Tag engine mounts for assembly. The left and right engine
mounts are not interchangeable with each other.
1.
Remove two locknuts (10), washers (1), capscrews (2), and washers (1) from support bracket (8) and
engine mount bracket (5). Discard locknuts (10).
2.
Remove capscrew (3) and vent tube clamp (4) from engine mount bracket (5).
3.
Remove three locknuts (9), washers (7), capscrews (6), washers (7), support bracket (8), and engine
mount bracket (5) from frame rail (11). Discard locknuts (9).
b. Installation
1.
Install support bracket (8) and engine mount bracket (5) on frame rail (11) with three washers (7),
capscrews (6), washers (7), and locknuts (9).
2.
Secure support bracket (8) on engine mount bracket (5) with two washers (1), capscrews (2),
washers (1), and locknuts (10). Tighten locknuts (10) and (9) to 90 lb-ft (122 Nm).
3.
Install vent tube clamp (4) on engine mount bracket (5) with capscrew (3).
Change 2
