TM 9-2320-280-34
6-6. STARTER REPAIR (Cont' )
d
3.
Remove four nuts (6), lockwashers (7), and two solenoid lead connectors (8) from frame and field
assembly (9) and solenoid (11). Discard lockwashers (7).
4.
Remove four capscrews (10) and solenoid (11) from frame and field assembly (9).
5.
Scribe a locating mark (12) on commutator end head (16) and frame and field assembly (9).
6.
Remove four capscrews (15), commutator end head (16), and gasket (17) from frame and field
assembly (9). Discard gasket (17).
7.
Remove thrust washer(s) (14) and spacer (13) from armature shaft (19). Discard spacer (13) and thrust
washer(s) (14).
8.
Remove oil felt washer (18) from commutator end head (16). Discard felt washer (18).
6-47
