TM 9-2320-280-34
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic's tool kit:
TM 9-2320-280-20
automotive (Appendix G, Item 1)
TM 9-2815-237-34P
Modified box wrench (Appendix C, Fig. 18)
Equipment Condition
Materials/Parts
Kick-down switch removed
Drain plug seal (Appendix E, Item 212)
(TM 9-2320-280-20).
Seal (Appendix E, Item 202)
Maintenance Level
Direct Support
a. Removal
1.
Remove two retaining rings (2) and pin (1) from rocker lever (3) and injection pump (4).
2.
Remove setscrew (8), rocker lever (3), plunger (7), and seal (6.1) from piston plug nut (6). Discard
seal (6.1).
3.
Using a modified box wrench, remove piston plug nut (6) from fuel injection pump (4).
4.
Remove drain plug seal (5) from piston plug nut (6). Discard seal (5).
b. Installation
1.
Install drain plug seal (5) on piston plug nut (6).
2.
Install piston plug nut (6) on fuel injection pump (4) with modified box wrench.
3.
Install seal (6.1), plunger (7), and rocker lever (3) on piston plug nut (6) with setscrew (8).
4.
Install rocker lever (3) on fuel injection pump (4) with pin (1) and two retaining rings (2).
Change 2
