TM 9-2320-280-34
3-25. ENGINE INSTALLATION (6.5 L) (Cont' )
d
116.
Position CDR valve (12) and bracket (10) over two intake manifold studs (3) and valve cover studs (6).
117.
Secure CDR valve (12) and bracket (10) on intake manifold (2) with two nuts (14). Tighten nuts (14)
to 15 lb-ft (20 N m).
118.
Secure CDR valve (12) and bracket (10) on valve cover (13) with two nuts (11). Tighten nuts (11) to 10
lb-ft (14 N m).
119.
Install heater control cable clamp (1) to CDR valve (12) and bracket (10) with washer (16) and
screw (15). Tighten screw (15) to 15 lb-ft (20 N m).
120.
Connect CDR valve oil fill tube hose (9) to oil fill tube (8) and tighten clamp (7).
121.
Connect CDR valve intake manifold hose (5) to intake manifold (2) and tighten clamp (4).
3-164
