TM 9-2320-280-34
3-22. ENGINE REMOVAL (6.2 L AND 6.5 L [DETUNED]) (Cont'd)
NOTE
Perform steps 130 through 132 for M1026, M1026A1, M1036,
M1038, M1038A1, M1042, M1044, M1044A1, M1046, and
M1046A1 vehicles only.
Prior to removal, tag leads for installation.
130.
Remove nut (9), lockwasher (10) and lead 7 (11) from starter terminal (8). Discard lockwasher (10).
131.
Remove nut (7), lockwasher (6) and lead 6 (4) from starter terminal (5). Discard lockwasher (6).
132.
Remove assembled locknut (1) and clamp (3) from oil pan bracket screw (2). Discard assembled
locknut (1).
NOTE
Steps 133 through 135 apply to M996, M996A1, M997, and
M997A1 vehicles only.
Prior to removal, tag leads for installation.
133.
Remove tiedown strap (19), bolt (20), clamp (21), and 200 ampere cable (22) from starter (23).
Discard tiedown strap (19).
NOTE
Step 134 applies to M997 and M997A1 vehicles only. Step 135
applies to M996 and M996A1 vehicles only.
134.
Remove assembled locknut (18), screw (15), cable (22), and clamps (16) and (17) from oil pan bracket (14).
135.
Remove assembled locknut (18), screw (15), cable (22), and clamp (16) from oil pan bracket (14).
3-76
Change 2
