TM 9-2320-280-34
3-22. ENGINE REMOVAL (6.2 L AND 6.5 L [DETUNED]) (Cont'd)
CAUTION
Cover or plug all hoses and connections immediately after
disconnection to prevent contamination. Remove all plugs prior to
connection.
98.
Loosen clamp (11) and disconnect surge tank-to-water crossover hose (10) from water crossover (9).
99.
Loosen two clamps (8) and disconnect heater hoses (7) at water crossover (9) and water pump (12).
WARNING
Diesel fuel is highly flammable. Do not perform this procedure
near fire, flames, or sparks. Severe injury or death will result.
100.
Loosen clamp (21) and disconnect fuel return hose (20) from fuel return line (22).
101.
Loosen clamp (15) and disconnect fuel supply line (16) from fuel pump (17).
102.
Loosen clamp (18) and disconnect vent line (19) from fuel pump (17).
103.
Loosen clamp (13) and disconnect water pump inlet hose (14) from water pump (12).
104.
Disconnect throttle return spring (25) from bracket (24).
105.
Loosen two nuts (28) and disconnect cable assembly (23) from bracket (24).
106.
Remove accelerator cable clip (27) and disconnect cable assembly (23) from throttle shaft lever (26).
Retain clip (27) for installation.
Change 2
3-71
