TM 9-2320-280-34
3-22. ENGINE REMOVAL (6.2 L AND 6.5 L [DETUNED]) (Cont'd)
WARNING
Diesel fuel is highly flammable. Do not perform this procedure
near fire, flames, or sparks. Severe injury or death will result.
NOTE
Tag fuel lines for installation.
107.
Loosen clamps (16) and (17) and disconnect fuel inlet line (18) and fuel outlet line (19) from
fuel filter (15).
108.
Remove assembled locknut (20) securing engine harness ground 3C (21) to body (1). Discard
assembled locknut (20).
109.
Disconnect engine harness connector (6) from time delay module (10).
110.
Remove rubber insulation (8) and disconnect engine harness connector plug (7) from protective
control box (9).
111.
Remove rubber insulation (11), nut (12), capscrew (4), clamp (5) and engine harness (3) from
"A" beam (2).
112.
Remove two screws (14), clamp (13), and engine harness (3) from body (1).
3-72
Change 2
