TM 9-2320-280-34
3-17. INTAKE MANIFOLD MAINTENANCE (Cont'd)
4.
Tighten all studs (22) and (23) and capscrews (24) and (20) to 30 lb-ft (41 Nm), following torque
sequence.
5.
Install harness brackets (6) and (17) on two studs (5) with washers (8) and nuts (7).
6.
Install harness bracket (11) on studs (16) with two washers (10) and nuts (9).
7.
Install harness clamp (1) on stud (4) with washer (3) and nut (2).
8.
Install fuel filter line clamp (14) on stud (15) with washer (13) and nut (12).
FOLLOW-ON TASKS: Install CDR valve bracket (TM 9-2320-280-20).
Install air horn (TM 9-2320-280-20).
Change 2
3-37
