TM 9-2320-280-34
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
T__ls
_oo_
E___pm_____ondi_i__
_ qui __ ent C ___ t on
General mechanic's tool kit:
Engine access cover removed (TM 9-2320-280-20).
automotive (Appendix G, Item 1)
Battery ground cable disconnected
(TM 9-2320-280-20).
___ er___ Part _
Mat__ials/____s
Gasket (Appendix E, Item 15)
Mai__enance_L_vel
___ nt _____ _e __
Direct support
Manual_R_fe____es
______ _e _ renc __
TM 9-2320-280-20
TM 9-2815-237-34P
a. Removal
1.
Loosen nut (3) connecting RPM sensor (4) to oil pump drive (6) and remove RPM sensor (4).
2.
Remove capscrew (1) and clamp (9) from cylinder block (8).
3.
Remove oil pump drive (6) and gasket (7) from cylinder block (8). Discard gasket (7).
b. Installation
1.
Install oil pump drive (6) and gasket (7) into cylinder block (8).
2.
Secure oil pump drive (6) with clamp (9) and capscrew (1). Tighten capscrew (1) to 25-37 lb-ft
(34-50 Nm).
3.
Align tab (5) on RPM sensor (4) with slot (2) in oil pump drive (6). Install RPM sensor (4) on oil
pump drive (6) with nut (3).
6.5 L
FOLLOW-ON TASKS: Connect battery ground cable (TM 9-2320-280-20).
Install engine access cover (TM 9-2320-280-20).
