TM 11-7440-284-14
4-23. INSTALLING SUBMOUNT ASSEMBLY. (CONT)
ACTION
REMARKS
ITEM
LOCATION
NOTE
A helper will be needed outside carrier.
Install, handtighten.
Screw (5),
3.
There are two screws. Step 3 is
flat washer (6),
typical for both screws.
flat washer (7)
and nut (8)
Do step 3 again.
Hole (9)
4.
Do steps 2, 3 and 4 again.
Brackets (10)
5.
There are four brackets.
Using two 1/2 inch box wrenches, tighten.
Screws (5)
6.
Using two 9/16 inch box wrenches,
Screws (11)
7.
tighten.
4-43
