TM 11-7440-284-14
4-20. INSTALLING REAR ANTENNA MOUNTING BRACKET. (CONT)
ACTION
REMARKS
ITEM
LOCATION
Install,
handtighten.
Screw (1), flat
8. Outside carrier,
washer (2), flat
There are four screws. Step 8 is
rear antenna
bracket
washer (3) and
typical for all four screws.
nut (4)
9.
Holes (5)
Do step 8 again.
Using two 9/16-inch box wrenches, tighten.
Screws (1)
10.
Reflector (6) and
Place and line holes.
11.
bracket (7)
Screw (8) and
Using cross-tip screwdriver, install.
12.
lockwasher (9)
There are two screws. Step 12 is
typical for both screws.
Hole (10)
Do step 12 again.
13.
Plate (11) and
Place and aline holes.
14. Inside carrier,
seat (12)
rear curbside
seat
Using cross-tip screwdriver, install.
Screw (13)
15.
There are four screws. Step 14 is
typical for all four screws.
Holes (14)
Do step 15 again.
16.
4-36
