TM 9-2320-289-34
6-14.
REAR AXLE SHAFT, OUTER SEAL, BEARING, AND BACKING PLATE
REPLACEMENT (M1009) (Con’t).
5 .
Aline hole in pinion shaft (4) with
Iockscrew (3) hole in differential case
(2) assembly. Install pinion shaft and
new Iockscrew. Tighten Iockscrew to
25 Ib.-ft. (34 N.m).
6 .
Install new gasket and differential
cover. Carefully position emergency
brake cable mounting bracket, brake
line block bracket, and brake line and
bracket. DO NOT kink lines. Install 10
bolts
and
tighten to
35 Ib.-ft.
(47 N.m).
FOLLOW-ON TASKS:
l Connect emergency brake cable to backing plate if removed. (See TM 9-2320-289-20)
l Connect rear brake line to wheel cylinder if removed. (See TM 9-2320-289-20)
l Install brake shoes and attaching hardware if removed. (See TM 9-2320-289-20)
l Install brake drum. (See TM 9-2320-289-20)
l Fill rear axle differential with lubricating oil. (See LO 9-2320-289-12)
TA50578
6-91
