6-14. REAR AXLE SHAFT, OUTER SEAL, BEARING, AND BACKING PLATE REPLACEMENT (M1009) (Cont)

b. CLEANING AND INSPECTION - TM-9-2320-289-34_643

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
627

TM 9-2320-289-34 6-14. REAR AXLE SHAFT, OUTER SEAL, BEARING, AND BACKING PLATE REPLACEMENT (M1009) (Con’t). WARNING Ensure that “C” lock (5) is correctly seated in Failure to correctly seat “C” lock may result in serious Injury or death to personnel. CAUTION differential side gear (7), loss of truck’s wheel and When Installing rear axle shaft (8), ensure that splines on end of shaft do not damage outer oil seal. Failure to follow this caution may result in damage to outer oil seal and exle lubricant leakage. 4 . Slide rear axle shaft (8) into position with splines engaged into differential side gear (7), Remove Iockscrew (3) and partially withdraw pinion shaft (4), Position “C” lock (5) on end of rear axle shaft, Pull rear axle shaft flange outward and seat “C” lock in differential side gear, Discard Iockscrew. TA50577 6-90

Privacy Statement
Press Release
Contact