TM 9-2320-289-34
6-14.
REAR AXLE SHAFT, OUTER SEAL, BEARING, AND BACKING PLATE
REPLACEMENT (M1009) (Con’t).
4 .
5 .
6 .
NOTE
Perform step 4 if removing outer oil seal (10) only.
Insert button end of rear axle shaft (8) behind steel case of outer oil seal (10), Remove outer
oil seal and discard.
NOTE
Perform step 5 if removing outer oil seal (10) and bearing (11).
Insert puller into bore so that tool grasps behind bearing (11). Remove bearing and outer oil
seal (1 O). Discard bearing and outer oil seal.
NOTE
Perform step 6 only if backing plate (15) is damaged.
Remove 4 nuts (13), Iockwashers (14), bolts (16), and remove backing plate (15) from axle
housing (1 2), Discard Iockwashers.
TA50576
6 - 88
