TM 9-2320-289-34
6-13.
REAR AXLE ASSEMBLY REPLACEMENT (Con’t).
a. REMOVAL
1.
Slide clamp up rear axle vent hose (8) and disconnect rear axle vent hose from rear axle
differential (7).
2.
Place suitable jack under rear axle differential (7).
WARNING
Rear axle assembly (6) is heavy. Use extreme caution, provide support, and
use assistance during removal. Failure to follow this warning may result in
serious injury to personnel or damage to rear axle assembly.
NOTE
For M1028A2 and M1028A3, skip step 3 and perform step 4.
3.
Remove 4 nuts (3), washers (2), 2
“U” bolts (5), and anchor plate (4) at
each spring assembly (1). Lower rear
axle assembly (6) and remove, If
present, remove 2 shims (9) from axle
housing.
4.
Remove 4 nuts (3), washers (2),
adapter (3.1), 4 washers (3,2), 2 “U”
bolts (5), and anchor plate (4) at each
spring assembly (1). Lower rear axle
assembly (6) and remove. If present,
remove
2
shims
(9)
from
axle
housing.
6-84
Change 2
