TM 9-2320-289-34
6-11.
STEERING KNUCKLE AND ARM MAINTENANCE (ALL EXCEPT M1009)
(Con’t).
NOTE
• On left side, steering arm (3) is installed to steering knuckle (8) with 4
nuts (2). On right side, upper kingpin bearing cap is installed to
steering knuckle with 4 bolts and Iockwashers.
l Left side disassembly is given.
1.
Remove 4 nuts (2) alternately at steering arm (3). Remove steering arm, spring (4), and
spring retainer (5). Remove gasket and discard. If present, discard 4 Iockwashers.
2 .
Remove 4 bolts (16), Iockwashers,
and lower kingpin bearing cap (15)
from steering knuckle (8). Discard
Iockwashers,
TA50563
6-72
