6-11. STEERING KNUCKLE AND ARM MAINTENANCE (ALL EXCEPT M1009)

6-11. STEERING KNUCKLE AND ARM MAINTENANCE (ALL EXCEPT M1009) (Cont) - TM-9-2320-289-34_624

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
606

TM 9-2320-289-34 6-11. STEERING KNUCKLE AND ARM MAINTENANCE (ALL EXCEPT M1009). This task covers: a. Disassembly b . A s s e m b l y INITIAL SETUP: Equipment Condition Materials/Parts l Steering tie-rod removed. • One gasket (See TM 9-2320-289-20) l Two seals l Connecting rod disconnected from steering l Eight Iockwashers arm (left side). (See TM 9-2320-289-20) l Grease (Item 36, Appendix B) l Front axle shaft removed, (See paragraph 6-4) Tools/Test Equipment General Safety Instructions l Socket wrench adapter, J-26871-A l Nuts at steering arm, or bolts at upper l Torque wrench kingpin bearing cap, must be removed alternately and with caution. a. DISASSEMBLY WARNING Nuts at steering arm or bolts at upper kingpin bearing cap must be removed alternately and with caution. Compression spring underneath steering arm or bearing cap could fly up during removal, causing serious injury to personnel. 6-71

Privacy Statement
Press Release
Contact