TM 9-2320-289-34
3-45.
FUEL INJECTOR PUMP CALIBRATION (Con’t).
13.
14.
15.
WARNING
l Diesel fuel is flammable, DO NOT perform this procedure near fire,
flames, or sparks.’ A fire extinguisher must be on hand in work area.
Failure to follow this warning may result in serious injury or death to
personnel,
l Compressed air used for cleaning purposes should never exceed 30 psi
(207 kPa). Use only effective chip guarding and personnel protective
equipment (goggles/shield, gloves, etc.). Failure to follow this warning
may result In serious injury to personnel.
Clean exterior of fuel injector pump
with fuel oil and dry with compressed
air.
Apply pipe sealant to servo adjusting
screw (22).
Install new face cam pin (20),
FOLLOW-ON TASKS:
l Install fuel injector pump. (See paragraph 3-37)
TA50766
3-174
