TM 9-2320-289-34
3-41.
FUEL INJECTOR PUMP REGULATOR AND TRANSFER PUMP BLADES
MAINTENANCE (Con’t).
3.
Remove retaining ring (7), inlet filter screen (8), and plate (9) from regulator (6) assembly.
Remove regulator assembly from hydraulic head (2).
NOTE
Ensure that position of potmark (12), and location of transfer pump blades
(11 ) and springs, are noted for installation.
4.
Remove liner (5). Remove 4 transfer
pump blades (11 ) with 2 springs.
Remove and discard end cap seal
(1 O) from’ groove in hydraulic head
(2) .
TA50738
3-141
