3-34. REAR MAIN SEAL REPLACEMENT.

b. CLEANING AND INSPECTION - TM-9-2320-289-34_186

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
168

TM 9-2320-289-34 3-34. REAR MAIN SEAL REPLACEMENT. This task covers: a. Removal c. Installation b. Cleaning and Inspection INITIAL SETUP: Equipment Condition Materials/Parts . Engine oil pump removed, l (See paragraph 3-33) l l Tools/Test Equipment l Torque wrench l l l General Safety Instructions One rear main seal 0.004 in. (0.102 mm) shim stock Carburetor cleaning compound (Item 15, Appendix B) Lubricating oil (Item 49, Appendix B) Anaerobic sealing compound (Item 59, Appendix B) Pipe sealant (Item 61, Appendix B) . Avoid skin contact with anaerobic sealing compound. . Carburetor cleaning compound is highly flammable. Keep away from open flame. a. REMOVAL 1. Remove 2 inner bolts, outer bolts, and rear main bearing cap (1). 2. Remove lower rear main seal half (5) and upper rear main seal half (6). Discard rear main seal halves. TA50711 3-110

Privacy Statement
Press Release
Contact