FOLLOW-ON TASKS - TM-9-2320-289-20

11-32. ROOF PANELS AND SUPPORTS REPLACEMENT (M1008 AND M1008A1) (Cont) - TM-9-2320-289-20_748

11-33. DOMELIGHT AND WIRING HARNESS REPLACEMENT (M1008 AND M1008A1)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
728

TM 9-2320-289-20 11-32. ROOF PANELS AND SUPPORTS REPLACEMENT (M1008 AND M1008A1) (Con’t). 6. 7. 8. 9. 10. 11. 12. 13. 14. Install 3 roof support brackets (9) to panel assembly (10) with 6 nuts (11). Place roof support bracket (3) through 2 roof panels (8) and air inlet adapter assembly (6). Loosely install 2 nuts (7) but DO NOT tighten. Place 2 roof support brackets (13) through 2 roof panels (8). DO NOT install 4 nuts (17). At front edge of 2 roof panels (8), install 2 bolts (12), retaining straps (4), and nuts (5). Install slotted end of rear support (2) into support to center bow support (1). Install slotted end of front support (15) to air support to center bow support (1). panel assembly (10). Raise forward end of rear inlet adapter assembly (6). Raise rear end of front Install roof support bracket (18) with attached domelight with 4 nuts (17). Tighten 2 nuts (7) at air inlet adapter assembly (6). Install domelight wiring harness clips (14) to front support (15) and connect domelight wiring harness connector (16) at ceiling. FOLLOW-ON TASKS: • Install cargo cover insulator. (See paragraph 11-27) • Connect both battery negative cables. (See paragraph 4-38) 11-121

Privacy Statement
Press Release
Contact