TM   9-2320-289-20 Table 2-1. Unit Level Preventive Maintenance Checks And Services for CUCV Item Interval Item To Be Procedure Not  Mission No. Inspected Capable  If: 1 Semi- PreService f. Check for transmission response f.  Transmission Annual Checks to shifting and for smoothness of op- shifts improperly, eration in all speed ranges. Be alert does not shift or Continued for  unusual  noises  and  difficulty  in makes excessive shifting in any speed range. noise. NOTE Lock front wheel hubs before checking transfer  (see  TM  9-2320-289-10). g.  Check  for  transfer  response  to g.  Transfer jumps shifting and for smoothness of opera- out of gear or makes tion  in  all  gear  ranges.  Be  alert  for excessive  noise. unusual noises and difficulty in shift- ing in any gear range. h.  Test  for  response  to  accelerator h.   Pedal   sticking   or feed. Observe for sticking pedal. binding. i. With vehicle speed approximately i.  Steering binds, 5 mph (8 kph) turn steering wheel to grabs,   wanders,   or left, then right, to detect hard steer- has excessive play. ing, binding or excessive play. Play should not exceed 1 inch (25.4 mm) in  either  direction.  With  vehicle  on straight,   level   terrain,   lightly   hold steering wheel to detect pull or wan- der. j.   Apply   brake   pedal   with   steady j. Brakes chatter, pull force. Vehicle should slow and stop to  one  side,  or  inop- without pulling to one side or jerking. erative. Brakes  will Release  brake  pedal.  The  brakes not release. should   release   immediately   and without difficulty. k.  Bring  vehicle  to  a  full  stop.  En- k.  Parking brake gage parking brake while transmis- does not hold vehicle sion  is  still  in  “D”  (DRIVE).  Vehicle stationary. should  remain  stationary. l. Observe vehicle response to road l.  Handling  is  unsta- shock.   Side   sway,   or   continuous ble. bouncing  indicates  a  malfunction. 2-8