TM 9-2320-289-20
Table 2-1. Unit Level Preventive Maintenance Checks and Services for CUCV
Item
Interval
Item To Be
Procedure
Not Mission
No.
Inspected
Capable If:
BEFORE ROAD TEST
Ensure Operator/Crew has performed
-10 PMCS listed in TM 9-2320-289-10.
NOTE
Fuse box is located on driver’s side of
cab under instrument panel.
1
Semi-
PreService
Annual
Checks
a. Check fuses, flashers, and switches
for looseness and damage. If loose or
damaged, tighten or replace as re-
quired.
b. Check fire extinguisher (on trucks
b. Fire extinguisher
authorized to contain fire extinguishers)
damaged, seal bro-
for serviceability in accordance with la-
ken or missing, gage
bel on fire extinguisher.
in recharge area.
ROAD TEST
Maintenance personnel will be with vehi-
cle operator to verify pre-service checks.
For road test, vehicle will be driven at
least five miles over different ground to
give enough time to detect any malfunc-
tions.
c. Seat
locking
c. For M1009 and M1010, check seat
mechanism does not
locking mechanism for proper operation.
operate properly.
d. Starter inoperative
d. Notice if starter engages smoothly
or makes excessive
and turns the engine at normal cranking
grinding sound.
speed.
e. Engine
knocks,
e. Listen for unusual engine noise at
rattles, smokes ex-
idle, at operating speeds, and under ac-
cessively, or any ex-
celeration. Be alert for excessive vibra-
haust noise.
tion, the smell of oil, fuel, or any exhaust
noises.
2-7
