TM 9-2320-289-20
8-4.
ROTOR AND WHEEL BEARINGS MAINTENANCE (Con’t).
NOTE
• If installing rotor (9), wheel bearings (19), and caliper bracket (14) on
all except M1009, perform steps 1, 3, and 4.
• If installing rotor (9), wheel bearings (19), and caliper bracket (17) on
M1009, perform steps 2, 3, 5, and 6.
1.
Install caliper bracket (14) and splash shield (13) on spindle (15) with 6 new Iockwashers (12)
and nuts (11). Tighten nuts to 65 Ib.-ft. (88 N•m).
2.
Install caliper bracket (17) on spindle (15) studs with 6 new locknuts (16). Tighten locknuts to
65 Ib.-ft. (88 N•m).
8-8
