TM 9-2320-289-20
3-13.
FUEL TANK SUPPLY AND RETURN HOSES AND PIPES REPLACEMENT (ALL
EXCEPT M1009) (Con’t).
13.
Install bolt (29), washer (28), and nut (26) to shield (25).
14.
Install ends of feed pipe (23) and return pipe (20) over support (31) and over left side of
frame.
15.
Connect feed hose (14) to feed pipe (23) and secure with clamp (13).
16.
Connect return hose (16) to return pipe (20) with clamp (15).
17.
Install pipes with clip (19) and screw (18) so that feed pipe (23) is to front, drain pipe
middle, and return pipe (20) is to back.
18.
Install cap (24) and clamp (32) to drain pipe (17).
19.
Install feed pipe (23) and return pipe (20) to support (31) with clip (33), bolt (30),
(34), and nut (35).
20.
Install 3 hoses (22) to pipes (17, 20 and 23) with clamps (21).
FOLLOW-ON TASKS:
Install fuel tank if removed. (See paragraph 3-11)
Connect both battery negative cables. (See paragraph 4-38)
Bleed air from fuel system if required. (See paragraph 3-17)
Check for leaks.
17) is in
washer
3-39
