TM 9-2320-289-20
3-13.
FUEL TANK SUPPLY AND RETURN HOSES AND PIPES REPLACEMENT (ALL
EXCEPT M1009) (Con’t).
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Loosen clamp (15) and disconnect return hose (16) from return pipe (38). Remove return
pipe.
Remove clamp (13) and feed hose (14) from feed pipe (12).
Remove clamp (15) and return hose (16) from return pipe (38).
Remove 6 screws (10) and clips (11) securing feed pipe (12) to frame.
NOTE
If truck is not equipped with
winterization
kits,
perform
steps 11 and 13 through 19.
If
truck
is
equipped
with
winterization
kits,
perform
steps 12-19.
Remove feed pipe (12) from fitting
(8) .
Disconnect feed pipe (12) and
auxiliary heater fuel inlet hose (41)
from fitting (8). Remove screw (43)
and clip (42) which hold feed pipe
and auxiliary heater fuel inlet hose
together.
NOTE
M1010 and trucks equipped with winterization kits DO NOT have a plug (9)
in fitting (8).
Remove plug (9) from fitting (8).
Remove fitting (8) from feed pipe (5).
Remove 2 clamps (6) and front feed hose (4).
Remove clip (7) securing front feed pipe (5) to frame.
Remove bolt (2), clip (3), battery cable bracket (1), and front feed pipe (5).
Remove 2 clamps (39), and remove front return hose (40).
Remove 4 screws (36) and clips (37), and remove return pipe (38).
TA49794
3-35
