TM 9-2320-280-34
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd)
INSTALLATION INSTRUCTIONS:
NOTE
Bottom support sling must be installed prior to engine or transmission removal.
When performing Step 1, ensure support hooks are
positioned flat on frame rail to prevent damage to oil and
vent lines. Ensure nuts on support hooks are adjusted
evenly to keep from bending engine or transmission
oil pan.
1.
Position bottom support sling (1) under engine or transmission oil pan (2).
2.
Slide support hooks (3) over frame rails (4) and hand tighten four nuts (5) until support sling (1) is snug
against oil pan (2). Tighten nuts (5) two more complete turns.
(SLING SUPPORTING TRANSMISSION)
(SLING SUPPORTING ENGINE)
C-18
