TM 9-2320-280-34
19-3. DIFFERENTIAL REPAIR (Cont'd)
90.
Using axle shaft and seal installer, install two seals (5) in housing (4).
4
5
AXLE SHAFT AND
SEAL INSTALLER
91.
Lubricate sealing surface on two output flanges (8) with lubricating oil.
92.
Install two output flanges (8), four O-rings (7), and two locknuts (6) on output shafts (2). Tighten
locknuts (6) finger tight.
2
8
7
6
FOLLOW-ON TASK: Install differential (para. 9-5).
Change 2
19-29/(19-30 blank)
